(732) 389-3535 ICERESIN@RANGERINK.COM

1 of 7
October 24, 2012
ICE Resin® Part A Resin
1. Identification
Manufacturer’s Name: Susan Lenart Kazmer LLC Date of Preparation: October 11, 2012
Street Address: 678 Grand Street City, State, Zip: Vermilion, OH 44089
Emergency Phone #: 800-424-9300 (CHEMTREC) Chemical Family: Epoxy Resin
Information Phone #: 888-235-1423 Chemical Name: Diglycidylether of Bisphenol-A
2. Hazard identification
Signal word: Warning
Emergency Overview
Blue tinted liquid with sweet characteristic odor.
May cause irritation to the skin, eyes, and/or respiratory tract.
May cause skin sensitization.
Hazard Statements:
H315 Causes skin irritation.
H317 May cause skin sensitization
H320 Causes eye irritation.
H335 May cause respiratory irritation.
Precautionary Statements:
P264 Wash thoroughly after handling.
P270 Do not eat, drink, or smoke when using this product.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).
Primary route of exposure: Inhalation, skin, eyes, ingestion.
Irritation data: Irritating to skin, eyes, and respiratory tract.
Inhalation: May cause respiratory irritation. Fumes may cause polymer-fume fever, a flu-like illness characterized by chills, headaches, and fever with chest tightness and mild cough. May cause an allergic respiratory response upon exposure to heated vapors.
2 of 7
October 24, 2012
ICE Resin® Part A Resin
Skin contact: Minor irritation. May be a skin sensitizer. Prolonged or repeated exposure may cause allergic reaction or sensitization characterized by rash, irritation, redness and burning, drying and cracking of the skin.
Eye contact: Minor transient irritation. No corneal injury likely.
Ingestion: Harmful if swallowed. May cause abdominal pain, vomiting, and diarrhea.
Medical conditions generally aggravated by exposure: Skin disorders and allergies.
3. Composition / Information on ingredients
Components
CAS#
%
Epoxy Resin
25085-99-8
90 – 100
Remaining components, if any, are not hazardous or hazardous components are present at <1% (0.1% for carcinogens).
4. First aid measures
Inhalation: Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Skin contact: Remove contaminated clothing and shoes. Wash affected area with soap and water until no evidence of the chemical remains. Wash clothing before reuse. Get medical attention if irritation develops.
Eye contact: Flush thoroughly with water for at least 15 minutes, occasionally lifting upper and lower lids, until no evidence of the chemical remains. Get medical attention, preferably from an ophthalmologist.
Ingestion: Treat symptomatically and supportively. Remove stomach contents by gastric suction or induce vomiting ONLY as directed by a physician or medical personnel. Get medical attention. Do not give anything by mouth to an unconscious person.
5. Fire-fighting measures
Flammable properties:
Flash Point: 485 °F (PMCC)
Flammable Limits: Not determined
Autoignition temperature: Not determined
Extinguishing media: Use water spray, dry chemical, foam, or carbon dioxide.
3 of 7
October 24, 2012
ICE Resin® Part A Resin
Protection of firefighters (specific hazards arising from the chemical): Closed containers may rupture violently when exposed to heat. Irritating vapors may be released. Combustion products may be hazardous.
Protective equipment and precautions for firefighters: Firefighters should wear full bunker gear including a positive pressure, NIOSH approved, self-contained breathing apparatus.
6. Accidental release measures
Personal precautions: Wear suitable protective equipment. Provide adequate ventilation. AVOID BREATHING VAPORS. Absorb with clay, diatomaceous earth, or other suitable inert absorbent. Carefully place spilled material into a clean, dry container and cover. Reclaim or place in suitable container for disposal.
Environmental precautions: Keep out of waterways.
7. Handling and storage
Handling: Wear suitable protective equipment. Wash thoroughly after handling. Keep container closed when not in use.
Storage: Store in a cool, dry place with adequate ventilation, away from combustibles.
8. Exposure controls / Personal protection
Component OSHA – PEL ACGIH – TLV
Epoxy Resin Not established Not established
Engineering controls: Use local or general dilution ventilation to maintain exposure below the exposure limits.
Eye protection: Safety glasses with side shields or choose in accordance with OSHA Personal Protective Equipment Standard 29 CFR 1910.133.
Skin protection: Recommended. Choose impervious protective gloves in accordance with OSHA Personal Protective Equipment Standard 1910.132.
Respiratory protection: Where airborne concentrations may exceed guidelines for permissible air concentrations, choose a respirator in accordance with OSHA Respirator Standard 29 CFR 1910.134. NIOSH approved respirators are only required when ventilation is inadequate.
4 of 7
October 24, 2012
ICE Resin® Part A Resin
General hygiene considerations: Wear appropriate protective clothing to minimize repeated or prolonged skin contact with this substance. Wash thoroughly after handling and before eating or drinking.
Other protective equipment: Safety shower and eye bath should be provided.
9. Physical and chemical properties
Appearance: Blue tinted liquid
Odor: Characteristic epoxy
Odor threshold: Not known
Physical state: Liquid
pH: Not determined
Boiling point: 149 °C
Melting/Freezing point: Not applicable
Evaporation rate: Slower than ether
Flammability: Will burn
Flash point: 485 °F
Upper explosive limits: Not determined
Lower explosive limits: Not determined
Vapor pressure: Not applicable
Vapor density: Not applicable
Specific gravity or Relative density: 1.12
Solubility: Not soluble
Oil/water coefficient: Not applicable
Autoignition temperature: > 300 °C
Decomposition temperature: Not determined
10. Stability and reactivity
Chemical stability: Stable
Conditions to avoid: Not applicable
Incompatible materials: Oxidizing agents, strong acids, amines, mercaptons, bases (in uncontrolled amounts). Reaction with peroxides may result in violent decomposition of the peroxide.
Hazardous decomposition products: Oxides of carbon
Possibility of hazardous reactions:
Polymerization: May occur with greater than one (1) pound product plus an aliphatic amine
Decomposition: Reaction with peroxides may result in violent decomposition
11. Toxicological information
5 of 7
October 24, 2012
ICE Resin® Part A Resin
Oral LD50 (rat): >2000 mg/kg
Corrosivity: Not corrosive
Sensitization: Skin
Carcinogenicity: No components are listed by IARC, NTP, or OSHA
Neurological effects: None known
Genetic effects: None known
Reproductive effects: None known
Developmental effects: None known
Target organs: Skin
Reproductive data (RTECS): None
12. Ecological information
Bisphenol A Based Epoxy Resin, CAS# 25085-99-8: LC50 (Flathead minnow): 3.1 mg/L
Persistence and degradability: This material shows little or no evidence of biodegradability. Caution should be taken prevent release to the environment.
13. Disposal considerations
Dispose in accordance with all applicable federal, state, and local environmental regulations. Recycling or reclamation should be considered.
Resource Conservation and Recovery Act (RCRA) regulations as found in 40 CFR 261: Not regulated
Information applies to the material as manufactured. Processing, use, or contamination may make the information inappropriate, inaccurate, or incomplete.
14. Transport information
Proper shipping name: Liquid plastic, NOS
Hazard Class: Not regulated
ID Number: Not regulated
Packing Group: Not regulated
Marine pollutant: Not listed by 49CFR 172.101
15. Regulatory information
6 of 7
October 24, 2012
ICE Resin® Part A Resin
OSHA: This material is classified as hazardous under OSHA regulations
TSCA: 25085-99-8 is listed on the TSCA 8(b) inventory
CERCLA Hazardous Substances List 40 CFR 302: None
SARA Title III Section 301 Extremely Hazardous Substances: None
SARA Title III Sections 311/312 Hazard Categories:
Acute: Yes
Chronic: Yes
Fire: No
Reactive: No
Sudden release of pressure: No
Toxic Chemicals List 40 CFR 372.65: None
RCRA Hazardous Waste Codes 40 CFR 261.24, 261.33: None
WHMIS: This material has been classified in accordance with the hazard criteria of the Controlled Product Regulations and is considered a D2A/2B Controlled Product. The SDS has been prepared in compliance with the CPR. Ingredients that are required to be reported under the WHMIS IDL are : None
DSL: 25085-99-8 is listed
EINECS: All components are listed or are exempt from listing
California: This product has been evaluated and does not require a warning under Proposition 65
16. Other information
ACGIH: American Conference of Governmental Industrial Hygienists
ACGIH TLV: ACGIH Threshold Limit Values
CAS: Chemical Abstract Service
CERCLA: Comprehensive Environmental Response, Compensation, and Liability Act
CFR: Code of Federal Regulations
CNS: Central Nervous System
CPR: Controlled Product Regulations
DSL: Domestic Substances List
EINECS: European Inventory of Existing Commercial Chemical Substances
IARC: International Agency for Research on Cancer
IDL: Ingredient Disclosure List
mg/kg: milligrams per kilogram
7 of 7
October 24, 2012
ICE Resin® Part A Resin
mg/L: milligrams per liter
mg/m3: milligrams of substance per cubic meter of air
NIOSH: National Institute of Occupational Safety and Health
NTP: National Toxicology Program
OSHA: Occupational Safety and Health Administration
OSHA PEL: OSHA Permissible Exposure Limits
ppm: parts per million
RCRA: Resource Conservation and Recovery Act
RTECS: Registry of Toxic Effects of Chemical Substances
SARA: Superfund Amendments and Reauthorization Act
TSCA: Toxic Substances Control Act
TWA: Time Weighted Average
WHMIS: Workplace Hazardous Materials Information System
The information and recommendations set forth herein are made in good faith and are believed to be accurate as of the date of preparation. Susan Lenart Kazmer LLC makes no warranty, either express or implied, with respect to this information and disclaims all liability from reliance on it