(732) 389-3535 ICERESIN@RANGERINK.COM

Materials:

  • ICE Resin®
  • ICE Resin® Mixing Cups and Stir Sticks
  • ICE Resin® Brushes
  • ICE Resin® Paper Sealer
  • Dina Wakley Gesso : White
  • Dina Wakley Media Board
  • Dina Wakley Media Brushes
  • Ranger Brushes
  • Printed Photos on Cardstock

  •  Mother’s Day Coasters by Taylor Huizenga

    Step 1: Cut Dina Wakley Media board into 4 – 4” x 4” squares. Paint each coaster with a coast of Dina Wakley Media White Gesso.

     Mother’s Day Coasters by Taylor Huizenga

    Step 2: Size photos to 3 5/8” x 3”. Print out photos on cardstock. Cut out photos and seal with ICE Resin® Paper Sealer. Be sure to coat the edges of the paper.

     Mother’s Day Coasters by Taylor Huizenga

    Step 3: Mix ICE Resin® according to instructions. Using a paintbrush, coat the backs of the photos with a coat of ICE Resin® and adhere to the media board. Allow to dry.

     Mother’s Day Coasters by Taylor Huizenga

    Step 4: Slowly pour a small amount of ICE Resin® into the center of your coaster. Be sure to not over pour, remember it is easier to add more if needed then it is to remove if you’ve added to much.

     Mother’s Day Coasters by Taylor Huizenga

    Step 5: Using your stir stick slowly push the resin out to the edges. ICE Resin® is self-doming which allows for it to be worked all the way to the edges and not overflow, as long as the resin is not over poured and there is too much.

     Mother’s Day Coasters by Taylor Huizenga

    Step 6: Repeat with all four coasters. Allow ICE Resin® to dry over night.