(732) 389-3535 ICERESIN@RANGERINK.COM

Materials:

  • Dina Wakley Media Board
  • Dina Wakley Media Paint- Buff, Gilt, Sterling
  • Dina Wakley Media Pouring Medium & Cell Creator
  • Dina Wakley Media Pouring Bottles
  • Dina Wakley Media Pouring Cups & Stir Sticks
  • ICE Resin® Plunger
  • ICE Resin® Squeegee
  • Ranger Non-Stick Craft Sheet
  • Paper Box Lid or Shallow Cardboard Box
  • Paper Cups
  •  Metallic Marbled Coasters by Kelly Krownowski | www.iceresin.com

    Step 1: Cut Dina Wakley Media Board to 4” x 4” squares.

     Metallic Marbled Coasters by Kelly Krownowski | www.iceresin.com

    Step 2: Prepare pouring area by placing paper cup(s) in a shallow cardboard box. Place Dina Wakley Media Board on top of paper cup to elevate. Have your pouring station ready before mixing paint. *Tip: Place an unused surface on the bottom of top to catch drippings and use in your mixed media artwork.

     Metallic Marbled Coasters by Kelly Krownowski | www.iceresin.com

     Metallic Marbled Coasters by Kelly Krownowski | www.iceresin.com

     Metallic Marbled Coasters by Kelly Krownowski | www.iceresin.com

    Step 3: Add 1 part Buff Dina Wakley Media Acrylic Paint to a Mixing Cup followed by 3 parts Dina Wakley Media Pouring Medium. Mix thoroughly. Add 3-4 drops of Dina Wakley Media Cell Creator and mix.

     Metallic Marbled Coasters by Kelly Krownowski | www.iceresin.com

    Add 1 part Gilt Dina Wakley Media Acrylic Paint to Dina Wakley Media Pouring Bottle followed by 3 parts Pouring Medium and shake. In a separate mixing bottle, repeat with Sterling Paint.

     Metallic Marbled Coasters by Kelly Krownowski | www.iceresin.com

    Step 4: Add diagonal stripes of the Buff Paint mixture to board.

     Metallic Marbled Coasters by Kelly Krownowski | www.iceresin.com

     Metallic Marbled Coasters by Kelly Krownowski | www.iceresin.com

    Using Applicator Bottle, add stripes of Sterling & Gilt Paint mixtures.

     Metallic Marbled Coasters by Kelly Krownowski | www.iceresin.com

    Tilt canvas and use stir stick to move paint to create marbled effects. Be sure paint is spread evenly over entire surface. Repeat on multiple boards to create coaster set. Set aside to dry.

     Metallic Marbled Coasters by Kelly Krownowski | www.iceresin.com

     Metallic Marbled Coasters by Kelly Krownowski | www.iceresin.com

    Step 5: Once poured Media Boards are dry, mix ICE Resin according to package instructions. Apply a small amount of mixed resin to each Media Board. Spread resin evenly across the Media Board and along the edges using an ICE Resin Squeegee. Allow to dry 8-10 hours before handling. Allow to cure 3 days before use.

    *Tip: Add 4 Adhesive Vinyl Bumpers to the bottom corners of each coaster to complete.