After thoroughly mixing ICE Resin®, the next step is to pour it into your bezels. Here are some tips:
Use the same craft stick that you used to thoroughly mix the ICE Resin®.
Take a small amount of resin on the tip of the stick and gently drip it into your bezel form, it will spread out and fill the bezel.
Let the resin naturally spread out. If it looks like you need to add more resin to fill the bezel, simply dip the stick back into your mixing cup and add more from the tip of the stick. It is best to start with a little and add, rather than too much and having the resin spill over your bezel.
When working with square or rectangular bezels, use your stick to encourage the resin into the corners.
ICE Resin® is perfect for layering. After filling the bezel with whatever images/objects you choose, you can fill half the bezel and let it dry. You can go back later and add another layer of images/glitter/color and then mix up a new batch of ICE Resin® and completely fill the bezel.
ICE Resin® takes 6 to 10 hours to dry, you can begin working with it when it is dry. if you have a special project that is particularly delicate you can use a small plastic squeeze bottle that you can control your mixed resin drip by drip.