MATERIAL SAFETY DATA SHEET
ICE Resin® Part A Resin
FOR COATINGS, RESINS, AND RELATED MATERIALS
This MSDS sheet meets the requirements of the Federal OSHA Hazard Communication Standard (29 CFR 1910.1200)
===============================================================================================
SECTION I
——————————————————————————————————————————————————————
Emergency Phone No: 800-424-9300 (CHEMTREC) Chemical Family: EPOXY RESIN
Chemical Name: DIGLYCIDYLETHER OF BISPHENOL-A
===============================================================================================
SECTION II HAZARDOUS INGREDIENTS
——————————————————————————————————————————————————————
Ingredient % (optional) CAS Number OSHA PEL mg/m3 ACGIH TLV-TWA mg/m3
——————————————————————————————————————————————————————
EPOXY RESIN 025085-99-8 NOT ESTABLISHED NOT ESTABLISHED
CONTAINS NO HAZARDOUS CHEMICALS IN EXCESS IF 1% AS INDICATED BY SUPPLIER’S MATERIAL SAFETY DATA SHEETS AND OSHA’S HAZARDOUS CHEMICALS STANDARDS
SECTION III PHYSICAL DATA
——————————————————————————————————————————————————————
Boiling Point (DEG F): N/A Specific Gravity (Water=1): 1.12
Vapor Pressure (mm Hg): N/A Percent Volatile by Volume: 0.0
Vapor Density (Air=1): N/A Evaporation Rate Vs Ether: N/A
Solubility in Water: NO
Appearance and Order: BLUE TINTED LIQUID, SWEET CHARACTERISTIC ODOR
===============================================================================================
SECTION IV FIRE AND EXPLOSION HAZARD DATA
——————————————————————————————————————————————————————
Flash Point (Method Used): 485 Deg F (PMCC) Flammable Limits: Not Determined
Extinguishing Media: Use Water Spray, Dry Chemical, Foam or Carbon Dioxide
Special Fire Fighting Procedures: Treat As A Class B Fire
Unusual Fire and Explosion Hazards: None
===============================================================================================
SECTION V HEALTH HAZARD DATA
——————————————————————————————————————————————————————
Effects of Overexposure:
INGESTION: LOW ACUTE ORAL TOXICITY; LD50 (RAT) GREATER THAN 2000 MG/KG.
EYE CONTACT: MINOR TRANSIENT IRRITATION. NO CORNEAL INJURY LIKELY.
SKIN CONTACT: ONLY MINOR IRRITATION. MAY BE A SKIN SENSITIZER.
SKIN ABSORPTION: NOT LIKELY TO BE ABSORBED THROUGH SKIN IN TOXIC AMOUNTS.
INHALATION: NOT CONSIDERED A PROBLEM UNLESS HEATED TO HIGH TEMPERATURE.
Emergency First Aid Procedure:
SKIN CONTACT: WASH WITH SOAP AND WATER; WASH CLOTHES BEFORE REUSE.
EYE CONTACT: IRRIGATE WITH WATER FOR FIVE MINUTES; CONSULT PHYSICIAN.
INHALATION: REMOVE TO FRESH AIR IF EFFECTS OCCUR; CONSULT PHYSICIAN.
INGESTION: INDUCE VOMITING IF LARGE AMOUNTS ARE INGESTED.
MATERIAL SAFETY DATA SHEET
ICE Resin® Part B Hardener
FOR COATINGS, RESINS, AND RELATED MATERIALS
This MSDS sheet meets the requirements of the Federal OSHA Hazard Communication Standard (29 CFR 1910.1200)
==============================================================================================
SECTION I
Emergency Phone No: 800-424-9300 (CHEMTREC) Chemical Family: EPOXY CURING AGENT
Chemical Name: ALIPHATIC AMINE
==============================================================================================
SECTION II HAZARDOUS INGREDIENTS
——————————————————————————————————————————————————————-
Ingredient % (optional) CAS Number OSHA PEL mg/m3 ACGIH TLV-TWA mg/m3
——————————————————————————————————————————————————————-
ALIPHATIC AMINE 9046-10-0 NOT ESTABLISHED NOT ESTABLISHED
NONYLPHENOL 25154-52-3 NOT ESTABLISHED NOT ESTABLISHED
SECTION III PHYSICAL DATA
——————————————————————————————————————————————————————-
Boiling Point (DEG F): >500 Deg F Specific Gravity (Water=1): .95
Vapor Pressure (mm Hg): N/A Percent Volatile by Volume: 0.0
Vapor Density (Air=1): N/A Evaporation Rate Vs Ether: LESS THEN
Solubility in Water: YES
Appearance and Order: CLEAR SLIGHTLY AMBER LIQUID, AMONICAL ODOR
==============================================================================================
SECTION IV FIRE AND EXPLOSION HAZARD DATA
——————————————————————————————————————————————————————-
Flash Point (Method Used): 255 Deg F (PMCC) Flammable Limits: Not Determined
Extinguishing Media: Use Water Spray, Dry Chemical, Foam or Carbon Dioxide
Special Fire Fighting Procedures: Treat As A Class B Fire: Use Water To Cool Containers
Unusual Fire and Explosion Hazards: None
==============================================================================================
SECTION V HEALTH HAZARD DATA
——————————————————————————————————————————————————————-
Effects of Overexposure:
INGESTION: LOW ACUTE ORAL TOXICITY.
EYE CONTACT: EXTREMELY IRRITATING WITH POSSIBLE EYE INJURY.
SKIN CONTACT: OVEREXPOSURE COULD CAUSE BURNS OR BLISTERING.
SKIN ABSORPTION: NOT LIKELY TO BE ABSORBED THROUGH SKIN IN TOXIC AMOUNTS.
INHALATION: NOT CONSIDERED A PROBLEM UNLESS HEATED TO HIGH TEMPERATURE.
Emergency First Aid Procedure:
SKIN CONTACT: WASH WITH SOAP AND WATER; WASH CLOTHES BEFORE REUSE.
EYE CONTACT: IRRIGATE WITH WATER FOR FIFTEEN MINUTES; CONSULT PHYSICIAN.
INHALATION:; REMOVE TO FRESH AIR IF EFFECTS OCCUR; CONSULT PHYSICIAN.
INGESTION: DO NOT INDUCE VOMITING: GIVE LARGE QUANTITIES OF WATER: GIVE ONE OUNCE VINEGAR IN ONE OUNCE WATER: CONSULT PHYSICIAN.
