(732) 389-3535 ICERESIN@RANGERINK.COM

Materials:

  • ICE Resin® 8 oz Kit
  • ICE Resin® Rune Bezels: Shield and Round
  • ICE Resin® Rune Bezel Template
  • Fabric
  • Scissors
  • Stickles™
  • ICE Resin® Leather Cord
  • ICE Resin® Leather Adhesive
  • ICE Resin® Findings: End Caps, Jump Rings, S Hooks
  • Pliers

  •  Bat Necklace  by Laura Lindson by Laura Lindson | www.iceresin.com

    Step 1: On the reverse side of your fabric, trace the shape of your bezels using the template and cut the shapes out.

     Bat Necklace  by Laura Lindson by Laura Lindson | www.iceresin.com

    Step 2: For a little added dimension, accent the fabric with Stickles and allow to fully dry.

     Bat Necklace  by Laura Lindson by Laura Lindson | www.iceresin.com

    Step 3: Mix ICE Resin® according to instructions. Using the stir stick, drip a small amount of resin into the bezel – enough for a thin layer covering the entire bottom of the bezel.

     Bat Necklace  by Laura Lindson by Laura Lindson | www.iceresin.com

    Step 4: Place the fabric in the bezel and, using the stir stick, work the fabric down into the resin so it is stuck to the bottom of the bezel and isn’t full of bubbles. You may want to use a Heat Tool to help get rid of the bubbles.

     Bat Necklace  by Laura Lindson by Laura Lindson | www.iceresin.com

    Step 5: Fill the bezels with more resin to get a doming effect and set aside to cure.

     Bat Necklace  by Laura Lindson by Laura Lindson | www.iceresin.com

    Step 6: Connect the bezels with a jump ring and measure 2 long and 2 short pieces of leather cord. Glue end caps to the cord using Leather Adhesive. Once dry, connect the cord to the bezels with jump rings and attach an S hook.