• ICE Resin® 8oz Kit
  • ICE Resin® Brushes
  • ICE Resin® Luminous Layers
  • ICE Resin® Paper Sealer
  • ICE Resin® Leather Adhesive
  • ICE Resin® Jewelry Mold
  • ICE Resin® Iced Enamels Copper Glitz
  • ICE Resin® Leather Cord
  • ICE Resin® Sari Ribbon
  • ICE Resin® Industrial Bezels: Rose Gold Small Circle and Large Rectangle
  • ICE Resin® Findings: Antique Bronze 5mm Endcaps and S Hooks
  • ICE Resin® Tint: Yarrow
  • ICE Resin® Industrial Bezel Templete
  • ICE Resin® Studio Sheet
  • Scissors
    Sandpaper or Dremel Tool
    Jewelry Cutter and pliers

    In this video, you will learn how to create a DIY Resin Necklace using ICE Resin Jewelry Molds. Add color and shine to ICE Resin with Iced Enamels and Luminous Layers for sparkle that pops!

    Step 1: Mix ICE Resin® according to instructions, allow the indicated wait time. Pour resin into the small circle cavity of the ICE Resin Jewelry mold.

    Step 2: In a separate Mixing Cup, mix ICE Resin with Copper Glitz ICED Enamels. Pour into large rectangle cavity of the ICE Resin Jewelry Mold. Allow to cure 8-12 hours.

    Step 3: Snip one of the loops from the Small Circle Rose Gold Industrial Bezel with jewelry cutter and sand smooth.

    Step 4: Attach small circle Industrial Bezel to large rectangle Industrial Bezel with jump ring. Add additional jump ring to the top of the Rose Gold Rectangle Industrial Bezel.

    Step 5: Using the ICE Resin Industrial Bezel Template, trace small circle onto a yellow ICE Resin Luminous Layer sheet. Cut out circle. Adhere to the inside of the small circle bezel with ICE Resin Paper Sealer.

    Step 6: Remove cured resin shapes from mold. Using a paintbrush, colorize the small circle resin piece with ICE Resin Yarrow Tint.

    Step 7: Mix a small batch of ICE Resin. Adhere molded resin shapes into corresponding bezels by painting a thin layer of mixed Resin into the bottom of the bezel and pressing molded resin pieces into place.

    Step8: To achieve a shiny finish, paint the tops and edges of the molded resin shapes with a thin layer of ICE Resin. Adhere metal filigree to small circle bezel with ICE Resin. Allow to dry 8-12 hours.

    Step9: Cut strands of ICE Resin Sari Ribbon and Leather Cord to desired length. Attach an End Cap to one end using ICE Resin Leather Adhesive. Thread strands through Jump Ring at the top of the Rectangle Bezel. Add End Cap to other end of necklace using ICE Resin Leather Adhesive. Let dry.

    Step10: Add an ICE Resin Findings S Hook and Jump Ring to End Caps to form a closure.